NICE TUB4000 Nice Sliding Door Motor, TUB 4000

NICE TUB4000 Nice Sliding Door Motor, TUB 4000

Nice Sliding Door Motor, TUB 4000
It is applied in sliding garden gates weighing 4000 kg. It is suitable for use in doors with medium density. With 380 V Ac current, the control unit is on the motor. Used with the A500 control unit. It has a constant speed of 0.17 m/s. It can be used on doors up to 30 meters. Door length up to 5 meters 30 cycles per hour, 5-10 meters 15 cycles, 10-15 meters 10 cycles, 15-20 meters 7 cycles, 20-25 meters 6 cycles, 25-30 meters door length 5 cycles per hour can cycle.

4000kg carrying capacity, 380v ac, 17cm/sec working speed, it is applied on doors of max 30 meters.

TUB4000

Energy Input: 400 Volts
Current Drawn: 1.65 A
Power: 550 watts
Speed: 0.17 m/s
Force: 7740 N
Working Continuity (Times / Hour): 200
Security: 44
Operating Temperature: -20 +50
Engine Dimensions (mm): 490*240*580h
Weight: 60 kg
About Nice Sliding Door Motor Group

Made in Italy, Nice sliding door motors are basically divided into 6 categories as Road – Rox – Robus – Run – Thor and HS. All engines are guaranteed for 2 years and our products are fully under the distributor's warranty.

Nice Rox Series: The Rox series offers a speed of 20 turns per hour and 18 cm per second with a capacity of 600 and 1000 kg. In general, it is suitable to be used in areas such as apartments, schools, workplaces where the usage density is not very high. Nice Rox control cards; ROA37, ROA38, ROA40 models are very easy to install and you only need 220 volts of electricity and press the control in Nice Rox sliding door motors, which are pre-installed by our company. In Nice Rox models, the control receiver is on the control card. It is necessary to be promoted to the Nice Robus series in places such as mass housing and parking lots where the number of apartments or vehicles is high.

Rox Series Technologies: OPERA, 220V

Nice Robus Series: The Robus series has a capacity of 400, 600 and 1000 kg and has a capacity of 50/60 turns per hour, offering speeds of 34 cm/sec, 31 cm/sec and 28 cm/sec respectively. It is suitable to be used in points such as mass housing, apartment, workplace where there is heavy vehicle traffic. With the Nice Robus RBA/3 control card, you can set many functions such as speed, torque, jamming detection, deceleration at closing, deceleration at opening, pedestrian mode, and you can customize the three contact inputs on the O-View device according to the scenario you want. You can start using your engine set by introducing the door in Nice Robus models that are pre-installed by us. Robus models are compatible with socketed OXI, OXIBD receiver systems, control receivers are on the card in kit products.

Robus Series Technologies: BiDi, Yubii, SOLEMYO, OPERA, BLUEBUS, 24V

Nice Road Series: Road series is especially suitable for your light doors and is an economical option. The built-in remote control receiver can memorize up to 100 remote controls, you can open and close 20 turns per hour with a speed of 18/25 cm/second. Thanks to the 24 volt DC infrastructure, you can use the PS124 battery even when there is no electricity. The Road series also has soft start-stop and obstacle recognition features.

Road Series Technologies: OPERA, 220V

Nice Run Series: The Run series is especially suitable for doors that need heavy and intensive use. It has all the features of the Robus series and offers a capacity of 1500-1800-2500 kg. The chassis of the Run series is made entirely of metal and offers high strength and security for industrial areas. In the Run series, 1500 kg motor 25cm/s, 1800 and 2500 kg motors 18 cm/sec and 2500 kg Inverter model offers 25 cm/sec speed, with intensive on-off capacity up to 60 turns per hour. The 2500 kg Inverter model is brushless and brushless, offering intensive use and maximum performance. Slow start stop, stall detection, speed, torque, three customizable command inputs are common to each motor. With OXI and OXIBD receiver, it can store up to 1024 remote controls.

Run Series Technologies: BiDi, Yubii, SOLEMYO, OPERA, BLUEBUS, 24V, 220V

Nice HS Series: Run HS and Robus HS models are indispensable in places where a fast engine is needed. It offers speeds of 70cm/sec, 37cm/sec and 44cm/sec, respectively, with 400 kg, 1200 kg and 500 kg (Robus) models. Run HS models have a capacity of 60 open-closes per hour, and the Robus HS model has all the features of the Robus / Run series with a capacity of 20 open-closes. You can also run it with a battery by connecting PS524 to Run HS series and PS124 to Robus HS model.

Nice HS Series Technologies: BiDi, Yubii, OPERA, BLUEBUS, 24V

Nice Thor Series: With a capacity of 1500 kg, the Thor series is an economical option for those who are looking for a motor for heavy doors, and offers a capacity of 20 rounds per hour and a speed of 17 cm per second. It is very easy to install and commission with its robust body and ROA control card. Its installation is the same as the Rox series and is ideal for heavy doors.